JL/JE Series Manual/Electric High Lift Trucks

Introduction of high lift truck

High lift truck is a new design with larger piston to offer you real 1000kg and 1500kg capacity. This series JL are manual high lift pallet jack and JE are electric high lift truck. It is very suitable as camió combinada de palets de mà i taula elevadora. Amb el mànec càlid ergonòmic, és molt senzill i còmode de funcionar. A més, les potes frontals de suport i els estabilitzadors ajustables estenen automàticament al terra amb l'aixecament de la forquilla, cosa que pot assegurar la màxima estabilitat i una frenada òptima. Pot mantenir la mateixa velocitat independentment del camió amb o sense càrrega.

This high lift pallet trucks can lift the pallets loading or unloading to the height you need. they can be used in various applications like factory, workshop, warehouse etc.

The manual high lift pallet truck has model: JL5210, JL6810, JL5215, JL6815;

The electric high lift pallet truck has model: JE5210, JE6810, JE5215, JE6815

             Manual high lift pallet truck JL series

We have this item in stock in France, if you are located in Europe, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of manual high lift skid jack truck:

Electric high lift pallet truck JE series

 

• High quality oil cylinder: The integrally sealed hydraulic cylinder can effectively avoid the disadvantages of oil leakage, improve the safety performance of the whole vehicle, lift quickly and improve work efficiency.
• Comfortable handle: Ergonomic design, the outer layer is rubberized and non-slip, the operation feels comfortable, and the drop speed of the hand-pulled pressure relief heavy cargo is controllable, which improves the operation safety.
• Exquisite workmanship: The surface of the car body has been subjected to high temperature baking paint, electrostatic spraying, the surface is smooth and smooth, durable, beautiful and corrosion-resistant.
• Anti-pinch scissors: The scissors are designed with increased spacing and anti-clamping to prevent accidental clamping of other items. Thickened steel enhances the bearing capacity, making it safer and more durable.

• La bomba i la llum extremadament fàcils, fan que aquesta unitat sigui molt adequada com a camió de palets manual i taula elevadora
• Control automàtic de la velocitat de descens mitjançant una vàlvula exclusivament hidràulica, la velocitat de descens sempre es manté igual, independentment del camió amb o sense càrrega. Evitarà que els danys de la càrrega baixin ràpidament.
• Disseny resistent: marc de forquilla de placa d'acer de 4 mm i pistó elevador més gran asseguren que el camió assoleixi la capacitat nominal.
• Molt adequat per combinar palet de mà i taula elevadora
• Les potes frontals de suport i els estabilitzadors ajustables estenen automàticament al terra quan les forquilles assoleixen una alçada de 420mm, per garantir la màxima estabilitat i una frenada òptima.
• Conforme a la norma EN1757-4.

Atenció i manteniment:

No sobrecarregueu;
Si es permet utilitzar les condicions del sòl;
Carregueu les mercaderies correctament;
Porteu sabates i guants de seguretat durant la manipulació;
Feu un control complet del funcionament abans de cada ús;
Muntatge de la màquina amb la tècnica d’elevació correcta;
Don't overlook the potential dangers that may exist during operation.

Proper maintenance will extend the life of the truck.
Check the oil, remove air and lubricate during maintenance.
Check the oil level every six months.
The newly injected oil to the rubber container should be 5mm below the liquid level, and the fork must be at the lowest position when adding oil.
When replacing the seal, air may enter the hydraulic system, place the joystick in the LOWER position, and then swing the handle a dozen times.
Lubricate the movable part with motor oil or oil.
Also pay attention to daily inspection and maintenance.
Inspection of the truck can reduce wear as much as possible.
Special attention should be paid to the wheel, axle, handle, fork, lift and lowering control.
Whenever work is completed, the fork should be unloaded and lowered to the lowest position.